Product Description
Single Acting Hydraulic Powerpack to operate a single acting cylinder on any trailer or tipper application complete with detachable two button pendent control and manual hand pump in case of power failure.
12v dc 1.6kw electric motor c/w relay and plastic motor cover.
2.1cc/rev gear pump.
10cc per stroke hand pump in case of power failure.
8 Litre reservoir c/w drain plug.
Powerpack complete with suction strainer, return oil conveyor and filler breather.
Horizontal mounting.
Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from 40-200 bar as standard.
Max flow 5 l/min @ 160 bar.
Adjustable flow control for cylinder decent control.
12v dc let down valve, relief and P line check
Port size 3/8" BSP
2 Button detachable pendent on a 4 metre lead
Suitable for all single acting applications
535 x 190 x 224mm (L x H x D)
This Single Acting power pack will require a high capacity battery and a suitable in-line fuse for normal operation.
The motor is designed for intermittent use (S3) which is defined as a sequence of identical cycles of 10 minute duration. The cycle comprises a period of on-load (td) operation in which the motor may reach its maximum permitted temperature, followed by an off-load (tm) of time, insufficient for the motor to return to ambient temperature.
The value of S3 on this motor equates to 7% or 42 seconds of on-load operation in a ten minute period.
(Available in 24v on request)
