Superwinch Large Mounting Plate

This Superwinch Mounting Plate has been designed and manufactured to suit Superwinch Talon 14 & 18 Winches and Tiger Shark 13500, 15500 and 17500.  Designed to be used for flat mounting applications.

Mounting plates should always be fitted by a suitably trained, competent person.  In order to resisit, without deformation, the loads induced by fiting a winch, this plate must be bolted down flat.  All three supports on the underside of the plate must be supported over their entire length.

The plate should be bolted down using 6 M12 8.8 minimum grade hex head fixing bolts (not provided) which are of suitable length based on fitting location.

Specification:

Dimensions: 599mm L x 243.8mm D x 100mm H
Winch Mounting Holes: 254mm x 165mm
Fairlead Mount: Suits Roller or Hawse Fairleads with 255mm Hole Centres
Finish: Black

Whilst every effort has been made to ensure accuracy of information relating to this product, in the interest of technical improvement this specification may be altered without notice.