Hydraulic Power Unit Packs Single Acting 12V

Single Acting Hydraulic Power pack unit to operate a single acting cylinder on any trailer or tipper application complete with detachable two button pendent control.

12v dc 1.6kw electric motor c/w relay and plastic motor cover. 
2.1cc/rev gear pump. 
4.5 Litre reservoir c/w drain plug (larger tanks available on request).
Powerpack complete with suction strainer, return oil conveyor and filler breather. 
Horizontal mounting 
Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from 40-200 bar as standard. 
Max flow 5 l/min @ 160bar
Adjustable flow control for cylinder decent control.
12v dc let down valve, relief and P line check.
Port size 3/8" BSP.

2 Button detachable pendent control on a 4 metre lead.
Suitable for all single acting applications.

400 x 198 x 185mm (L x H x D)

This single acting power pack will require a high capacity battery and a suitable in-line fuse for normal operation.

The motor is designed for intermittent use (S3) which is defined as a sequence of identical cycles of 10 minute duration. The cycle comprises a period of on-load (td) operation in which the motor may reach its maximum permitted temperature, followed by an off-load (tm) of time, insufficient for the motor to return to ambient temperature.

The value of S3 on this motor equates to 7% or 42 seconds of on-load operation in a ten minute period.