Single Acting Hydraulic Powerpack to operate a single acting cylinder on any trailer or tipper application complete with detachable two button pendent control.
24v dc 1.6kw electric motor c/w relay and plastic motor cover.
2.1cc/rev gear pump.
4.5 Litre reservoir c/w drain plug.
Powerpack complete with suction strainer, return oil conveyor and filler breather.
Max pressure 200 bar.
Relief valve set at 160 bar but adjustable from 40-200 bar as standard.
Max flow 5 l/min @ 160bar
Adjustable flow control for cylinder decent control.
24v dc let down valve, relief and P line check.
Port size 3/8" BSP.
2 Button detachable pendent control on a 4 metre lead.
Suitable for all single acting applications.
This single acting power pack will require a high capacity battery and a suitable in-line fuse for normal operation.
The motor is designed for intermittent use (S3) which is defined as a sequence of identical cycles of 10 minute duration. The cycle comprises a period of on-load (td) operation in which the motor may reach its maximum permitted temperature, followed by an off-load (tm) of time, insufficient for the motor to return to ambient temperature.
The value of S3 on this motor equates to 7% or 42 seconds of on-load operation in a ten minute period.